Identity Testing and Component Specifications Workflow

21 CFR Part 111 Subpart E  |  21 CFR 111.70, 111.75  |  Dietary Supplement CGMP
21 CFR 111.70  ·  111.73  ·  111.75
21 CFR 111.77  ·  111.80  ·  Part 111 Subpart E
Every dietary ingredient lot needs at least one
appropriate identity test or examination
Phase 1 - Specifications and Supplier Qualification
Phase 2 - Sampling and Testing
Phase 3 - Disposition and Corrective Action
Phase 4 - Records and Ongoing Review
Decision point
GMPify Procedural Map Series
💊

Identity Testing and Component Specifications - Confirming What Goes Into the Product

Under 21 CFR Part 111, a dietary supplement manufacturer must establish specifications for every component it uses and must verify, before use, that each component meets them. For a dietary ingredient, that includes at least one appropriate test or examination to confirm identity. Other specifications may be verified by testing, or by relying on a supplier certificate of analysis once the supplier has been qualified. This map details the pathway from setting specifications through sampling, testing, disposition, and records.

21 CFR Part 111 Subpart E  ·  111.70  ·  111.75  ·  111.77
21 CFR 111.70
21 CFR 111.75
Certificate of Analysis

Dietary Ingredient

A component that is a dietary ingredient needs at least one appropriate identity test or examination on each lot received.

Basis: Identity test, every lot

Other Component

Ingredients, excipients, and other components confirmed against specifications by testing or by a qualified certificate of analysis.

Basis: Spec check or qualified COA

Supplier COA

A certificate of analysis may be relied on only after the supplier has been qualified and the COA reliability has been established.

Basis: Qualification and re-confirmation

Quality Control

Quality control personnel review and approve the decisions on specifications, supplier qualification, and component disposition.

Basis: QC approval
Phase 1
Specifications and Supplier Qualification
1Identify every component used in manufacturing
List each dietary ingredient and other component used in the manufacture of the dietary supplement.
21 CFR 111.70(b)
↓
2Establish an identity specification for each component
Written identity specification defined for every component, with a scientifically valid method to confirm it.
21 CFR 111.70(b)(1)
↓
3Establish other component specifications
Limits on contaminants that may adulterate or lead to adulteration, plus purity, strength, and composition specifications where they apply to the finished product.
21 CFR 111.70(b)(2) and (b)(3)
↓
4Qualify suppliers whose certificates of analysis will be relied on
Establish the reliability of the supplier COA by confirming its results, and document the qualification.
21 CFR 111.75(a)
Phase 2
Sampling and Testing
Is the component a dietary ingredient?
YES → Identity test, then other specifications NO → Confirm specifications by test or qualified COA
↓
5Collect representative samples of each lot
Samples taken so they represent the lot received, by a documented sampling plan and procedure.
21 CFR 111.80
↓
6Conduct the identity test or examination
At least one appropriate test or examination performed on each dietary ingredient lot, using a scientifically valid method.
21 CFR 111.75(a)(1)
↓
7Verify other specifications
Contaminant limits and other specifications confirmed by testing, or by a COA from a supplier you have qualified.
21 CFR 111.75(a)
Phase 3
Disposition and Corrective Action
8Quality control reviews the results
Quality control personnel determine whether the component meets its specifications before it is used.
21 CFR 111.73
↓
9Release only components that meet specifications
A component that meets every specification is approved and released for use in manufacturing.
21 CFR 111.73
↓
10Reject or control components that fail
A component that does not meet specifications is rejected, unless quality control approves a documented treatment, in-process adjustment, or reprocessing that brings it into compliance.
21 CFR 111.77
Phase 4
Records and Ongoing Review
11Document results, methods, and decisions
Test and examination results, methods used, and the quality control decisions recorded and retained.
21 CFR 111.75; Subpart P records
↓
12Re-confirm supplier COA reliability periodically
Periodically confirm supplier COA results by independent testing, and respond if the COA proves unreliable.
21 CFR 111.75(a)
↓
13Review specifications when materials, suppliers, or risks change
Specifications and the methods that verify them reviewed and updated so they continue to protect product identity and quality.
21 CFR 111.70
Component Types (Overview)

Dietary Ingredients

Components such as vitamins, minerals, herbs, and botanicals. Each lot requires at least one appropriate identity test or examination.

21 CFR 111.75(a)(1)

Other Components

Excipients, binders, fillers, and processing aids. Specifications may be confirmed by testing or a qualified COA.

21 CFR 111.75(a)(2)

Components That Fail

Rejected, or controlled through documented treatment or reprocessing approved by quality control before use.

21 CFR 111.77

Specification Categories (Overview)

Identity Confirms the component is what it is labeled and purchased to be, for example the correct plant part or species of a botanical.
Purity and composition Defines what the component should and should not contain, where these affect the quality of the finished supplement.
Strength Defines the amount of active constituent or marker expected, where this applies to the component.
Contaminant limits Sets limits for contaminants, such as heavy metals, microbes, or pesticide residues, that could adulterate the product.

Key Outputs (Overview)

Written specifications Documented identity and other specifications for every component, with approved methods.
Supplier qualification file Evidence that each supplier COA has been shown to be reliable, with periodic re-confirmation.
Test and examination records Results for each lot, linked to the sampling record and the quality control decision.
Disposition records Documented release, rejection, or controlled treatment decision for every component lot.

Component Control Quality Elements

Complete Specifications Every component has an identity specification and the other specifications that matter for the finished product.
Fit-for-Purpose Identity Test The identity method distinguishes the component from likely substitutes and adulterants.
Validated Methods Test methods are scientifically valid and suitable for the component matrix.
Representative Sampling Sampling plans reflect the lot and prevent a single container being treated as the whole lot.
COA Reliability Supplier COAs are accepted only after confirmation of results and periodic re-confirmation.
Quality Control Authority Quality control makes and documents the release and rejection decisions.
Failure Handling Failed components are quarantined and dispositioned under written procedures.
Record Traceability Records link each lot to its samples, results, and decisions from receipt to use.

Never do this

Release a dietary ingredient on a supplier COA alone with no identity test of your own. Accept a COA from a supplier you have never qualified. Use a component before quality control has approved it. Treat a failed lot as usable without a documented, approved treatment.

Dietary ingredient vs other component

A dietary ingredient lot needs at least one appropriate identity test or examination. For other specifications, and for other components, a qualified supplier COA can substitute for your own testing, provided the reliability conditions are met.

When a COA can be relied on

You qualify the supplier by confirming the COA results, the COA describes the tests or examinations conducted, you document the qualification, and you periodically re-confirm the results. A COA does not remove the need for an identity test on dietary ingredients.

Key regulations

21 CFR 111.70 - specifications. 111.73 - determining whether specifications are met. 111.75 - verification of component specifications. 111.77 - components that do not meet specifications. 111.80 - representative samples.